20 in stock

Introducing AIRCOOL, a portable evaporative cooler that is manufactured in accordance with European high-tech. The cooler surface is made of ABS engineering plastics which is UV resistant, anti-corrosion, anti-aging and anti deformation.

The evaporative air cooler works on the principle of heat absorption by moisture evaporation. Hot & dry ambient air is filtered & cooled by passing through cellulous pads. The pads are wet by water recycling, and pushed out by powerful blower to certain areas.

AIRCOOL is not only cooling any space but also equipped with Anion, which is a negative ion that can kill bacteria in the air so that the air is not only fresh but also safe for health. This portable cooler is also capable of giving cool and breeze sensation to cover up 50-60m2 also equipped with a 30L water tank that can be used for a long time.

WeightWater Tank
Aircool800*480*1380mm380 W8.000 m3/h50-70 m231kg57L

This product is currently out of stock and unavailable.

SKU: Evprtvclr-1 Category: ,



Our Evaporative Cooler are the perfect solution for your indoor or outdoor space. Its a green cooling system, no CFC, no compressor,power consumption is only 1/8 of air conditioner.

An evaporative cooler (also known as evaporative air conditioner, swamp cooler, swamp box, desert cooler and wet air cooler) is a device that cools air through the evaporation of water. Evaporative cooling differs from other air conditioning systems, which use vapor-compression or absorption refrigeration cycles. Evaporative cooling exploits the fact that water will absorb a relatively large amount of heat in order to evaporate (that is, it has a large enthalpy of vaporization). The temperature of dry air can be dropped significantly through the phase transition of liquid water to water vapor (evaporation). This can cool air using much less energy than refrigeration. In extremely dry climates, evaporative cooling of air has the added benefit of conditioning the air with more moisture for the comfort of building occupants

The cooling potential for evaporative cooling is dependent on the wet-bulb depression, the difference between dry-bulb temperature and wet-bulb temperature (see relative humidity). In arid climates, evaporative cooling can reduce energy consumption and total equipment for conditioning as an alternative to compressor-based cooling. In climates not considered arid, indirect evaporative cooling can still take advantage of the evaporative cooling process without increasing humidity. Passive evaporative cooling strategies can offer the same benefits as mechanical evaporative cooling systems without the complexity of equipment and ductwork.

Before the advent of modern refrigeration, evaporative cooling was used for millennia, for instance in qanats, windcatchers, and mashrabiyas. A porous earthenware vessel would cool water by evaporation through its walls; frescoes from about 2500 BCE show slaves fanning jars of water to cool rooms. Alternatively, a bowl filled with milk or butter could be placed in another bowl filled with water, all being covered with a wet cloth resting in the water, to keep the milk or butter as fresh as possible (see zeer, botijo and Coolgardie safe).

Evaporative cooling is a common form of cooling buildings for thermal comfort since it is relatively cheap and requires less energy than other forms of cooling

Evaporative Cooler


Additional information

Weight40 kg
Dimensions51 × 35 × 150 cm



515*350*1500mm, 800*480*1380mm


Go to Top